info@gigacopper.net
Your basket is currently empty!
Fibre optic distribution in the apartment building
The basic infrastructure of fibre-optic supply is now reaching the big cities. The development of apartment buildings is a particular hurdle: often the provider installs the fibre optic transfer points (ONTs) in the basement, but does not offer a solution for forwarding the individual connections to the flats.
Experience shows that this task is assigned to the owners‘ association: they are supposed to provide the necessary subsequent wiring. As a rule, this is associated with great effort and expense and requires a high degree of coordination between owners and the property management. Moreover, in some cases, such as in listed buildings, new cables are often not allowed to be laid.
We also offer a solution for apartment buildings that uses existing telephone or coax cabling in the building. It can be implemented quickly and without construction measures. It is compatible with any fibre provider and scalable to buildings of any size.
All our telephone switches and EndPoints support both SISO (2-wire) and MIMO (4-wire) operation, with which the range can be additionally extended. G.now Vectoring technology VectorBoost enables connections with 1GBit symmetrical. When using coaxial cables for SAT reception, this is retained, parallel operation with CATV from 258MHz is also feasible.
Installation example: telephone cables are used – 12 party residential complex.
Switches und EndPoints for phone cables
G4200-4/8T – for 4/8 EndPoints
- 4/8 * G.hn Wave2 SISO/MIMO Port (RJ45)
- G.now Vectoring (VectorBoost)
- 2 * 1000-X/2500-X/10000-X Port (SFP/SFP+)
- 3 * 10/100/1000BaseT Port (RJ45)
- 1 * RS232 Console-Port (RJ45)
- 2 * SYNC BNC Port, Time synchronisation with other G.hn switches
G4224T – for 24 EndPoints
- 24 * G.hn Wave2 SISO/MIMO Port (RJ45)
- G.now Vectoring (VectorBoost)
- 2 * 1000-X/2500-X/10000-X Port (SFP/SFP+)
- 1 * 10/100/1000BaseT Port (RJ45)
- 1 * RS232 Console-Port (RJ45)
- 1 * RJ21 Port (24 * POTS-Telefon)
- 2 * SYNC BNC Port, Time synchronisation with other G.hn switches
G4201TM EndPoint
- 1 * G.hn Wave2 SISO/MIMO Port (RJ11)
- G.now Vectoring (VectorBoost)
- 1 * 10/100/1000BaseT Port (RJ45)
Switches and EndPoints for coax cables
G4200-4/8C – for 4/8 lines
- 4/8 * G.hn Wave2 Port (F-Connector), each port supports up to 16 EndPoints on one line (recommended up to 8)
- 2 * 1000-X/2500-X/10000-X Port (SFP/SFP+)
- 3 * 10/100/1000BaseT Port (RJ45)
- 1 * RS232 Konsole-Port (RJ45)
G4200C – for 6 lines
- 6 * G.hn Wave2 Port (F-Connector), each port supports up to 16 EndPoints on one line (recommended up to 8)
- With G.hn port combination – up to 4 lines / 64 EndPoints
- 1 * 1000-X/2500-X/10000-X Port (SFP/SFP+)
- 2 * 10/100/1000BaseT Port (RJ45)
- 1 * RS232 Konsole-Port (RJ45)
